Toyota AUDIO 1-DIN, Руководство пользователя

Страница: 9 / 39

- 8 -
RADIO OPERATION
HOW TO TURN ON THE RADIO
(1) Press the MODE/POWER BUTTON to select the desired radio
source "AM", "FM".
The selected mode is shown in the DISPLAY WINDOW .
(2) To tune, follow one of the procedures below:
Press the TUNE BUTTON
Press the CH BUTTON
TO TURN OFF THE RADIO
Press the MODE/POWER BUTTON to turn off the radio.
To turn on the radio, press the button again.
HOW TO TUNE
MANUAL TUNING
(1) Press the TUNE ( ) or ( ) BUTTON for less than 2 seconds.
Each time the button is pressed, the frequency steps up (or down) to select
the station of your choice.
The display should be checked in order to adjust the frequency because AM
radio frequency will range from 9 kHz or FM radio frequency will range from
0.05 MHz.
AUTOMATIC TUNING
(1) Press the TUNE ( ) or ( ) BUTTON for more than 2 seconds.
The radio starts searching for stations, and stops when it nds a station.
To cancel, press the button again.
NOTE
When the TUNE ( ) BUTTON is pressed, the radio is tuned to the higher
frequency side (step up), and to the lower frequency side (step down) when
pressing the TUNE ( ) BUTTON .
In either case, if the radio cannot nd a station, it continues searching.
The radio will stop searching at a broadcasting station upon reception.
HOW TO STORE STATIONS (PRESET)
You can store up to six preset channels for FM and AM radio.
TUNING TO A PRESET CHANNEL
(1) Press the CH BUTTON for less than 2 seconds.
(2) Press the TUNE ( ) or ( ) BUTTON , and then select the number
of the preset channel you want to listen to.
For example: "CH1" is displayed in the DISPLAY WINDOW .
SAVING TO A PRESET CHANNEL
(1) Tune to the channel number you want to save.
(2) Press the CH BUTTON for more than 2 seconds.
The frequency ashes in the DISPLAY WINDOW .
(3) Press the TUNE ( ) or ( ) BUTTON to select the frequency you
want to save.
(4) Press the CH BUTTON for more than 2 seconds.
The frequency lights up in the DISPLAY WINDOW when it has been
saved to a preset channel.