Toyota AUDIO 1-DIN, Руководство пользователя

Страница: 7 / 39

- 6 -
BASIC OPERATION
HOW TO FEED POWER
The AUDIO system works only when the ignition switch is ACC or ON.
(1) Press the MODE/POWER BUTTON to turn the power on.
To turn the power off, press and hold down the switch for 1 second or
more.
NOTE
If the MODE/POWER BUTTON is pressed while listening to music in AUDIO
mode, the power is turned OFF. When you press the MODE/POWER BUTTON
again, the AUDIO system continues using the last mode just before it was
turned off.
HOW TO SWITCH AUDIO MODES
(1) Press the MODE/POWER BUTTON .
Each time you press the MODE/POWER BUTTON , the audio
mode changes as shown below.
AM FM DISC
*1 *2
USB
*3
AUX
*4
AM...
*1 The content to be displayed varies depending on the data stored
in the CD. (CD/MP3/WMA)
*2 These modes are skipped when a CD is not inserted.
*3 This mode is skipped when a USB is not connected.
*4 This mode is skipped when a device is not connected.
HOW TO ADJUST THE VOLUME
(1) Press the VOLUME CONTROL BUTTON to adjust the volume.
Press the VOLUME CONTROL ( ) BUTTON to increase the volume.
Press the VOLUME CONTROL ( ) BUTTON to decrease the volume.
To adjust the volume by 1 step at a time, press the VOLUME CONTROL
( ) or ( ) BUTTON for less than 1 second.
To adjust the volume steadily, press and hold down the VOLUME
CONTROL ( ) or ( ) BUTTON for more than 1 second.
ATTENTION
Turning the power on or off with the volume set to maximum will damage the
equipment and your hearing. Set the volume to a moderate level.
NOTE
You can adjust within a range of 63 (maximum) and 19 (default) and 0.