1. Before proceeding, see
SERVICE PRECAUTIONS
. Disable SRS. See
DISABLING &
ACTIVATING AIR BAG SYSTEM
.
2. Air bag sensor is located forward of center console. See
Fig. 1
. Remove upper console panel, rear
console box, console panel garnish, ash receptacle box, heater control panel, and center cluster finish
panel. See
Fig. 8
. Disconnect the connector with air bag sensor installed. Remove 3 Torx screws and air
bag sensor assembly.
Fig. 8: Removing Air Bag Sensor
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
Installation
To install, reverse removal procedure. Tighten 3 air bag sensor screws to specification. See
TORQUE
SPECIFICATIONS
. Connect air bag sensor connector after the sensor is installed. Activate SRS. See
DISABLING & ACTIVATING AIR BAG SYSTEM
. Check air bag warning light to ensure system is
functioning properly. See
SYSTEM OPERATION CHECK
.
STEERING WHEEL PAD & SPIRAL CABLE
1996 Toyota 4Runner
AIR BAG RESTRAINT SYSTEM 1996 ACCESSORIES/SAFETY EQUIPMENT Toyota Air Bag Restraint System
Microsoft
Tuesday, August 18, 2009 7:33:32 PM
Page 11
© 2005 Mitchell Repair Information Company, LLC.
