Toyota 2013 RAV4, Руководство пользователя

Страница: 263 / 528

261
4-5. Using the driving support systems
4
D
riv
in
g
RAV4_OM_OM42899E_(AE)
■
Operating tips
The system will operate when the shift lever is in a position other than P, how-
ever to make effective use of the system it is recommended to select a lower
shift range.
■
When the downhill assist control system is operated continuously
This may cause the brake actuator to overheat. In this case, the downhill
assist control system will stop operating, a buzzer will sound and the downhill
assist control system indicator will start flashing, and the “TRC OFF” will be
shown on the multi-information display. Refrain from using the system until
the downhill assist control system indicator stays on and the message goes
off. (The vehicle can be driven normally during this time.)
■
Sounds and vibrations caused by the DAC
●
A sound may be heard from the engine compartment when the engine is
started or just after the vehicle begins to move. This sound does not indicate
that a malfunction has occurred in DAC.
●
Either of the following conditions may occur when the DAC is operating.
None of these are indicators that a malfunction has occurred.
• Vibrations may be felt through the vehicle body and steering.
• A motor sound may be heard after the vehicle comes to a stop.
■
System malfunction
●
The downhill assist control system indicator does not come on when the
engine switch is turned to the “ON” position (vehicles without a smart entry
& start system) or IGNITION ON mode (vehicles with a smart entry & start
system).
●
The downhill assist control system indicator does not come on when the
“DAC” switch is pressed.
●
The slip indicator comes on.
In the above cases, have your vehicle checked by your Toyota dealer.
Not For Reproduction