Toyota 2005 ECHO Скачать руководство пользователя страница 341 | Manualshive

Страница: 341 / 433

Toyota 2005 ECHO Скачать руководство пользователя страница 341

195

2005 ECHO from Aug. ’04 Prod. (OM52636U)

SU41054b

(a) Towing with wheel lift type truck—

—From rear

(b) Using flat bed truck

—From front

If towing is necessary, we recommend
you to have it done by your Toyota
dealer or a commercial tow truck ser-
vice. In consultation with them, have
your vehicle towed using either (a) or
(b).

Only when you cannot receive a towing
service from a Toyota dealer or com-
mercial tow truck service, tow your ve-
hicle carefully in accordance with the
instructions given in “—Emergency
towing” in this Section.

Proper equipment will help ensure that
your vehicle is not damaged while being
towed. Commercial operators are generally
aware of the state/provincial and local
laws pertaining to towing.

Your vehicle can be damaged if it is
towed incorrectly. Although most operators
know the correct procedure, it is possible
to make a mistake. To avoid damage to
your vehicle, make sure the following few
precautions are observed. If necessary,
show this page to the tow truck driver.

TOWING PRECAUTIONS:

Use a safety chain system for all towing,
and abide by the state/provincial and local
laws. The wheels and axle on the ground
must be in good condition. If they are
damaged, use a towing dolly.

(a) Towing with wheel lift type truck

From front—Release the parking brake.

NOTICE

When lifting wheels, take care to en-
sure adequate ground clearance for
towing at the opposite end of the
raised vehicle. Otherwise, the bumper
and/or underbody of the towed vehicle
will be damaged during towing.

From rear—

Manual transmission:

We recommend using a towing dolly
under the front wheels. If you do not
use a towing dolly, place the ignition
key in the “ACC” position and put the
transmission in neutral.

NOTICE

Do not tow with the key removed or
in the “LOCK” position when towing
from the rear without a towing dolly.
The steering lock mechanism is not
strong enough to hold the front
wheels straight.

If your vehicle needs to be
towed—

«
...
339
340
341
342
343
...
»

Содержание 2005 ECHO


















































































































































































































































































































































































































































Отзывы:

Нет отзывов