Toyota 2005 ECHO Скачать руководство пользователя страница 151

Страница: 151 / 433

2005 ECHO from Aug. ’04 Prod. (OM52636U)

SP14015a

TURN SIGNALS

To signal a turn, push the headlight/
turn signal lever up or down to position
1.

The key must be in the “ON” position.

The lever automatically returns after you
make a turn, but you may have to return
it by hand after you change lanes.

To signal a lane change, move the lever
up or down to the pressure point (position
2) and hold it.

If the turn signal indicator lights (green
lights) on the instrument panel flash faster
than normal, a front or rear turn signal
bulb is burned out.

Emergency flashers

SU14014

To turn on the emergency flashers,
push the switch.

All the turn signal lights will flash. To turn
them off, push the switch once again.

Turn on the emergency flashers to warn
other drivers if your vehicle must be
stopped where it might be a traffic hazard.

Always pull as far off the road as pos-
sible.

The turn signal light switch will not work
when the emergency flashers are operat-
ing.

NOTICE

To prevent the battery from being dis-
charged, do not leave the switch on
longer than necessary when the en-
gine is not running.

Содержание 2005 ECHO


















































































































































































































































































































































































































































Результаты поиска

Содержание 2005 ECHO

Отзывы:

Toyota 2005 ECHO, Руководство пользователя, Страница: 151 / 433

Результаты поиска

Содержание 2005 ECHO

Отзывы: