Toyota 2004 MR2 Spyder Скачать руководство пользователя страница 45

Страница: 45 / 258

2004 MR2 from Feb. ’04 Prod. (OM17518U)

When the ignition key is turned to the

“ON” position, the light does not come

on, remains on or flashes.

The light comes on or starts flashing

while driving.

If any seat belt does not retract or

cannot be pulled out due to a malfunc-

tion or activation of the relevant seat
belt pretensioner.

The seat belt pretensioner assembly or

surrounding area has been damaged.

SB13045a

In the following cases, contact your Toyota

dealer as soon as possible:

The front of the vehicle (shaded in the

illustration) was involved in an accident
that was not severe enough to cause

the seat belt pretensioners to operate.

Either seat belt pretensioner assembly
or surrounding area is scratched,

cracked, or otherwise damaged.

SB13092a

The SRS (Supplemental Restraint Sys-

tem) airbags are designed to provide

further protection for the driver and

passenger in addition to the primary

safety protection provided by the seat

belts.

In response to a severe frontal impact,

the SRS airbags work together with the

seat belts to help reduce injury by inflat-

ing. The SRS airbags help reduce injuries

mainly to the driver’s or passenger’s head

or chest caused by hitting the vehicle in-

terior. When the passenger airbag manual

−

off switch is in the “ON” position, the

passenger airbag is activated if there is

no passenger in the seat.
Always wear your seat belt properly.

03 12.25

SRS driver airbag and

passenger airbag

Содержание 2004 MR2 Spyder



































































































































































































































































Результаты поиска

Содержание 2004 MR2 Spyder

Отзывы:

Похожие инструкции для 2004 MR2 Spyder

Бренды по названию

Популярные бренды

Toyota 2004 MR2 Spyder, Руководство пользователя

Результаты поиска

Содержание 2004 MR2 Spyder

Отзывы:

Похожие инструкции для 2004 MR2 Spyder

Бренды по названию

Популярные бренды