A77857
Vernier Calipers
A98226
New Gasket
Wooden Block
Plastic--faced
Hammer
A98222
(c)
(d)
(c)
(d)
A77857
Vernier Calipers
15--4
--
EXHAUST
EXHAUST PIPE ASSY (1ND--TV)
COROLLA Supplement (RM1129E)
8.
INSTALL EXHAUST PIPE ASSY FRONT
(a)
Check the free length.
(1)
Using vernier calipers, measure the free length of
the compression spring.
Minimum: 41.5 mm (1.634 in.)
If the free length is less than the minimum, replace the compres-
sion spring.
(b)
Using a wooden block and plastic--faced hammer, tap in
a new gasket until it is flush with the exhaust manifold con-
verter.
NOTICE:
S
Make sure that the gasket is in the correct direction
when installing.
S
Do not reuse a removed gasket.
S
Never push the gasket into the exhaust manifold by
installing the exhaust pipe front onto the exhaust
manifold converter.
(c)
Install the exhaust pipe front onto the 2 exhaust pipe sup-
ports No. 5.
(d)
Tighten the 2 compression springs and 2 bolts.
Torque: 43 N
⋅
m (440 kgf
⋅
cm, 32 ft
⋅
lbf)
9.
INSTALL EXHAUST PIPE ASSY TAIL
(a)
Check the free length.
(1)
Using vernier calipers, measure the free length of
the compression spring.
Minimum: 38.5 mm (1.516 in.)
If the free length is less than the minimum, replace the compres-
sion spring.
To Alphabetical Index
To Sub Index
TOYOTA COROLLA REPAIR MANUAL SUPP 1129E
