Toyota 2003 COROLLA, Дополнение к руководству по ремонту

Страница: 429 / 923

D32448
Main:
55
_
-- 5 5
_
0
_
Sensor Arm
1 2
3
D32448
Sub:
55
_
-- 5 5
_
0
_
Sensor Arm
4 5
6
05 -- 328
-- DIAGNOSTICS MULTI -- MODE MANUAL TRANSMISSION SYSTEM
COROLLA Supplement (RM1129E)
10 INSPECT SHIFT STROKE SENSOR
(a) Remove the shift s troke s ensor.
(b) Check the voltage of the s hift stroke sensor (main).
(1) Connect 3 dry c ell batteries (1.5 V) in series.
(2) Connect the positive battery (+) lead to terminal 3
and the negative battery ( -- ) lead to terminal 2.
(3) Check the voltage between terminals 1 and 2 when
moving the s ensor arm.
Standard:
Combined dry cell battery voltage of 4.5 V:
Sensor angle (degree) Terminal (1 -- 2) output voltage (V)
55
_
Approx. 4.05 V
0
_
Approx. 2.25 V
-- 5 5
_
Approx. 0.45 V
Reference:
Combined dry cell battery voltage of 5.0

0.3 V:
Sensor angle (degree) Terminal (1 -- 2) output voltage (V)
55
_
Approx. 4.5 V
0
_
Approx. 2.5 V
-- 5 5
_
Approx. 0.5 V
(c) Check the voltage of the s hift stroke sensor (sub).
(1) Connect 3 dry c ell batteries (1.5 V) in series.
(2) Connect the positive battery (+) lead to terminal 6
and the negative battery ( -- ) lead to terminal 5.
(3) Check the voltage between terminals 4 and 5 when
moving the s ensor arm.
Standard:
Combined dry cell battery voltage of 4.5 V:
Sensor angle (degree) Terminal (4 -- 5) output voltage (V)
55
_
Approx. 4.05 V
0
_
Approx. 2.25 V
-- 5 5
_
Approx. 0.45 V
Reference:
Combined dry cell battery voltage of 5.0

0.3 V:
Sensor angle (degree) Terminal (4 -- 5) output voltage (V)
55
_
Approx. 4.5 V
0
_
Approx. 2.5 V
--55
_
Approx. 0.5 V
NOTICE:
S
Do not apply more than 6 V.
S
Do not drop the shift stroke sensor. If it is dropped, re-
place it with a new one.
NG REPLACE SHIFT STROKE SENSOR
(SEE PAGE 41--25)
OK
BACK TO CHAPTER INDEX
TO MODEL INDEX
To Alphabetical Index
To Sub Index TOYOTA COROLLA REPAIR MANUAL SUPP 1129E