Toyota 2003 Camry Скачать руководство пользователя страница 80

Страница: 80 / 307

’03Camry_U (L/O 0301)

2003 CAMRY from Jan. ’03 Prod. (OM33593U)

Move seat

fully back

A forward

−

facing child restraint sys-

tem should be allowed to be

installed on the front passenger

seat only when it is unavoidable.

Always move the seat as far back

as possible, because the force of

the deploying front passenger air-

bag could cause death or serious

injury to the child.

On vehicles with side airbags and
curtain shield airbags, do not allow

the child to lean against the door

or around the door even if the child
is seated in the child restraint sys-

tem. It is dangerous if the side air-

bag and curtain shield airbag in-
flate, and the impact could cause

death or serious injury to the child.

Do not install a child restraint sys-
tem on the rear seat if it interferes

with the lock mechanism of the

front seats. This can cause death or
serious injury to the child and front

passenger in case of sudden brak-

ing or a collision.

If the driver’s seat position does

not allow sufficient space for safe

installation, install the child re-
straint system on the rear right

seat.

Содержание 2003 Camry




















































































































































































































































































































Результаты поиска

Содержание 2003 Camry

Отзывы:

Toyota 2003 Camry, Руководство пользователя, Страница: 80 / 307

Результаты поиска

Содержание 2003 Camry

Отзывы: