Toyota 2003 Camry страница 54 Скачать руководство пользователя

Страница: 54 / 307

’03Camry_U (L/O 0301)

2003 CAMRY from Jan. ’03 Prod. (OM33593U)

CAUTION

After inserting the tab, make sure
the tab and buckle are locked and

that the seat belt extender is not

twisted.

Do not insert coins, clips, etc. in

the buckle as this may prevent you

from properly latching the tab and
buckle.

If the seat belt does not function
normally, immediately contact your

Toyota dealer. Do not use the seat

until the seat belt is fixed. It cannot
protect an adult occupant or your

child from injury.

The outside shoulder belt comfort

guides for the rear seat outside posi-
tions will provide added seat belt com-

fort for children who have outgrown

child restraints and for small adults.
When the outside shoulder belt is in-

serted through the guide, the comfort

guide pulls the belt away from the neck
and head of an occupant.
To use the comfort guide, do as fol-
lows.

Seat belt comfort guides are stored in the

both pockets on the sides of the rear
seatback.

—Seat belt comfort guides

Содержание 2003 Camry




















































































































































































































































































































Результаты поиска

Содержание 2003 Camry

Отзывы:

Похожие инструкции для 2003 Camry

Бренды по названию

Популярные бренды

Toyota 2003 Camry, Руководство пользователя

Результаты поиска

Содержание 2003 Camry

Отзывы:

Похожие инструкции для 2003 Camry

Бренды по названию

Популярные бренды