Toyota 1RZ, Инструкция к добавке

Страница: 367 / 525

P15971
Oil Pressure Switch
SST
P22267
P14816
Knock
Sensor
SST
EM--82
-- ENGINE MECHANICAL CYLINDER BLOCK (2RZ--FE, 3RZ--F)
S
Parts must be assembled within 5 minutes of ap-
plication. Otherwise the material must be removed
and reapplied.
S
Immediately remove nozzle from the tube and rein-
stall cap.
(c) Install the retainer with the 6 bolts.
Torque:
13.5 N ∙ m (135 kgf ∙ cm, 9.7 ft ∙ lbf)
1 5 . I NS TALL CRANKS HAFT P O S I T I O N S E NS O R
CO NNE CTO R BRACKE T
1 6 . I NS TALL E NG I NE WI RE BRACKE T
1 7 . I NS TALL RH AND LH E NG I NE MO UNTI NG
ASSEMBLIES
Torque:
52 N ∙ m (520 kgf ∙ cm, 38 ft ∙ lbf)
18. INSTALL OIL PRESSURE SWITCH
(a) Apply adhesive to 2 or 3 threads of the oil pressure switch.
Adhesive:
Part No. 08833--00080, THREE BOND 1344,
LOCTITE 242 or equivalent
(b) Using SST, install the oil pressure switch.
SST 09816 -- 30010
1 9 . I NS TALL E NG I NE CO O L ANT DRAI N CO CK
Torque:
24.5 N ∙ m (250 kgf ∙ cm, 18 ft ∙ lbf)
2 0 . O I L FI LT E R BRACKE T
(a) Install a new O--ring to the union bolt.
(b) Install a new gasket, the union bolt, nut and oil filter brack-
et.
Torque:
Union bolt: 68.5 N ∙ m (700 kgf ∙ cm, 51 ft ∙ lbf)
Nut: 12 N ∙ m (120 kgf ∙ cm, 8.9 ft ∙ lbf)
21. INSTALL OIL FILTER
(S e e pa ge LU -- 1 )
22. INSTALL WATER BYPASS PIPE
Torque:
20 N ∙ m (200 kgf ∙ cm, 14 ft ∙ lbf)
2 3 . I NS TALL KNO CK S E NS O R
Using SST, install the knock sensor.
SST 09816 -- 30010
Torque:
37 N ∙ m (380 kgf ∙ cm, 27 ft ∙ lbf)
CLICK HERE TO VIEW CHAPTER INDEX Pages From Supplement
TO MODEL INDEX
CONTINUED
3RZ-F,3RZ-FE