Toyota 1993 MR2, Схемы проводки

Страница: 162 / 189

169
A27(B)
AUTO ANTENNA CONTROL RELAY
9–GROUND : APPROX. 12 VOLTS WITH IGNITION SW AT ON POSITION
5–GROUND : APPROX. 12 VOLTS WITH IGNITION SW AT ACC OR ON POSITION
7–GROUND : ALWAYS APPROX. 12 VOLTS
8–GROUND : APPROX. 12 VOLTS WITH IGNITION SW AT ACC OR ON POSITION AND RADIO SW ON
3–GROUND : CONTINUITY (UPPER LIMIT SW ON) UNLESS ANTENNA AT UP STOP
2–GROUND : CONTINUITY (DOWN LIMIT SW ON) UNLESS ANTENNA AT DOWN STOP
4–3 : CLOSED WITH IGNITION SW AT ACC OR ON POSITION AND RADIO SW ON AND PLAYER SW OFF UNTIL ANTENNA AT
UPPERMOST POSITION
1–2 : CLOSED WITH IGNITION SW AT ACC OR ON POSITION AND RADIO SW OFF AND PLAYER SW OFF UNTIL ANTENNA AT
LOWERMOST POSITION
1–2 : CLOSED WITH IGNITION SW OFF UNTIL ANTENNA AT LOWERMOST POSITION
: PARTS LOCATION
CODE SEE PAGE CODE SEE PAGE CODE SEE PAGE
A27 27 R 1 A 26
J 1 26 R 2 B 26
: RELAY BLOCKS
CODE SEE PAGE RELAY BLOCKS (RELAY BLOCK LOCATION)
1 20 R/B NO. 1 (LEFT KICK PANEL)
2 21 R/B NO. 2 (ENGINE COMPARTMENT LEFT)
5 21 R/B NO. 5 (FRONT LUGGAGE COMPARTMENT RIGHT)
: JUNCTION BLOCK AND WIRE HARNESS CONNECTOR
CODE SEE PAGE JUNCTION BLOCK AND WIRE HARNESS (CONNECTOR LOCATION)
3A
22 COWL WIRE AND J/B NO 3 (BEHIND COMBINATION METER)
3D
22 COWL WIRE AND J/B NO. 3 (BEHIND COMBINATION METER)
: CONNECTOR JOINING WIRE HARNESS AND WIRE HARNESS
CODE SEE PAGE JOINING WIRE HARNESS AND WIRE HARNESS (CONNECTOR LOCATION)
IE1
32 ENGINE ROOM MAIN WIRE AND COWL WIRE (LEFT KICK PANEL)
IE4
32 ENGINE ROOM MAIN WIRE AND COWL WIRE (LEFT KICK PANEL)
II3 34 COWL WIRE AND LUGGAGE ROOM WIRE (RIGHT KICK PANEL)
: GROUND POINTS
CODE SEE PAGE GROUND POINTS LOCATION
BI 36 BACK PANEL CENTER
BG 36 UNDER THE LEFT CENTER PILLAR
: SPLICE POINTS
CODE SEE PAGE WIRE HARNESS WITH SPLICE POINTS CODE SEE PAGE WIRE HARNESS WITH SPLICE POINTS
I 8 34 COWL WIRE B28 36 ENGINE ROOM MAIN WIRE
1 2
3 4 5 6
8 9
B R 1 A27 R 2
X 8
20
J 1 A
1
8 X
21
SERVICE HINTS