Toyama TEPU1.5S-220, Руководство пользователя

Страница: 9 / 20

9
•
Place the MOTOVIBRADOR in a vertical position 30 to 50 cm deep at
approximately 8 to 10 times the pipe diameter.
IMPORTANT
According to one of the items in the standard NBR-5410, it is necessary to
use an electrical overload protection (SALVA MOTOR) in the network in
which the equipment will be installed.
The motor is specific and closed type electric, the outer shell made of
lightweight aluminum alloy. The degree of its insulation is E. It has following
characteristics such as small volume, light weight, and good operational
capacity under dusty and muddy environments.
There is a handle and a switch on the top of the engine, and on the bottom,
there is a rotating bottom disc that can rotate 360 ° freely, to make
transportation easier, and consequently operation.