TOX PRESSOTECHNIK FinePress ZFL, Оригинальная инструкция по эксплуатации

Страница: 14 / 76

Safety
14 TOX_Manual_FinePress_ZFS-ZFL-ZFW_en
Ÿ
Take action to ensure safe operation and make sure that the product is
maintained in a functional condition.
Ÿ Only allow authorized persons access to the product.
Ÿ
Ensure that all personnel work with awareness of safety and potential
dangers with reference to the information in the operating manual.
Ÿ Provide personal protective equipment.
Ÿ
Maintain all safety and information on dangers regarding the product
complete and in legible condition and replace as required.
Ÿ
Do not make any changes, carry out attachments or conversions to the
product without the written approval of TOX
®
PRESSOTECHNIK. Ac-
tion contrary to the above will not be covered by the warranty or the op-
erating approval.
Ÿ
Make sure that the annual safety inspections are carried out and docu-
mented by an expert.
2.2.2 Selection and qualifications of personnel
The following safety requirements are applicable for the selection and quali-
fications of personnel:
Ÿ Only appoint persons to work on the plant who have read and under-
stood the operating manual, and in particular, the safety instructions
before starting work. This is particularly important for persons who only
work on the plant occasionally, e.g. for maintenance work.
Ÿ
Only allow persons appointed and authorized for this work access to
the plant.
Ÿ Only appoint reliable and trained or instructed personnel.
Ÿ
Only appoint persons to work in the danger zone of the plant who can
perceive and understand visual and acoustic indications of danger (e.g.
visual and acoustic signals).
Ÿ Ensure that assembly and installation work and the initial commission-
ing are performed exclusively by qualified personnel who have been
trained and authorized by TOX
®
PRESSOTECHNIK.
Ÿ
Maintenance and repairs must be performed by qualified and trained
personnel only.
Ÿ Ensure that personnel who are being trained, instructed or are in an ap-
prenticeship can only work on the plant under the supervision of an ex-
perienced person.
Ÿ
Have work on electrical equipment performed only by electricians or
trained persons under the direction and supervision of an electrician in
accordance with the electrotechnical regulations.