TOX PRESSOTECHNIK FinePress KFL Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 86

background image

Important information

TOX_Manual_FinePress_KFS-KFL-KFW_en

7

1 Important information

1.1

Legal note

All rights reserved.

Operating instructions, manuals, technical descriptions and software pub-
lished by TOX

®

PRESSOTECHNIK GmbH & Co. KG ("TOX

®

PRES-

SOTECHNIK") are copyright and must not be reproduced, distributed and/
or otherwise processed or edited (e.g. by copying, microfilming, translation,
transmission in any electronic medium or machine-readable form). Any use
- including of extracts - contrary to this condition is prohibited without ap-
proval in writing by TOX

®

PRESSOTECHNIK and may be subject to crimi-

nal and civil legal sanctions.

If this manual refers to goods and/or services of third parties, this is for ex-
ample only or is a recommendation by TOX

®

PRESSOTECHNIK.

TOX

®

PRESSOTECHNIK does not accept any liability or warranty/guaran-

tee with reference to the selection, specifications and/or usability of these
goods and services. The use and/or representation of trademarked brands
that do not belong to TOX

®

PRESSOTECHNIK are for information only; all

rights remain the property of the owner of the trademarked brand.

Operating instructions, manuals, technical descriptions and software are
originally compiled in German.

1.2

Exclusion of liability

TOX

®

PRESSOTECHNIK has checked the contents of this publication to

ensure that it conforms to the technical properties and specifications of the
products or plant and the description of the software. However, discrepan-
cies may still be present, so we cannot guarantee complete accuracy. The
supplier documentation included with the system documentation is an ex-
ception.

However, the information in this publication is checked regularly and any
required corrections are included in subsequent editions. We are grateful
for any corrections and suggestions for improvement. TOX

®

PRES-

SOTECHNIK reserves the right to revise the technical specifications of the
products or plant and/or the software or documentation without prior notice.

1.3

Conformity

The product is compliant with EU guidelines.
See separate EU-declaration of conformity or installation declaration.

«
...
5
6
7
8
9
...
»

Содержание FinePress KFL























































































Отзывы:

Нет отзывов

Похожие инструкции для FinePress KFL

Бренд: Vector Страницы: 6

Бренд: National Flooring Equipment Страницы: 23

Бренд: HARDELL Страницы: 8

Бренд: Tripp Lite Страницы: 3

Бренд: AEMC Страницы: 24

Бренд: LEYBOLD Страницы: 3

Бренд: Pattfield Ergo Tools Страницы: 2

Бренд: Crown Страницы: 116

Бренд: Clam Страницы: 4

Бренд: Wibre Страницы: 2

Diamond Hone 100

Бренд: Chef's Choice Страницы: 8

Бренд: PRODEM Страницы: 48

Бренд: Yokota Страницы: 6

Бренд: nextys Страницы: 6

Бренд: Parker Страницы: 12

Бренд: Magma Страницы: 2

Бренд: MW Страницы: 5

Бренд: Crestron Страницы: 16

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды