YW1930
This is an interconnect lock. Inside is always unlocked. Deadbolt can be extended from
inside or outside by
lifting lever or using thumbturn on the inside. From inside, rotating lever
down will retract both bolts. From
the outside, presenting a valid user code and
rotating the lever down will retract both bolts.
Key Override
Rotating the key clockwise
,
approximately 90
o
-120
o
,
will allow you to rotate the lever and retract both bolts.
The key will not retract the bolts. Return key back to home position to pull out key.
Tools Needed For Lock Installation
Phillips screw driver
Flat Head screw driver
Note:
Do not use a power drill for installation of lock as it can damage lock.
Tools May Be Needed For Door Preparation
Tape Measure
Power Drill (For drilling holes ONLY)
1" and 2 1/8" Drill Bits
Wood Chisel
Pencil
7/64 Hex Wrench
When batteries are installed and lock is ready to be operated, refer to programming guide for programming
instructions.
Содержание e-Genius 2000 Series
Страница 23: ...E x p l o d e dV i e wO f L o c k 2 2 YW1930 ...
Страница 47: ...E x p l o d e dV i e wO f L o c k 2 2 YW2030 ...