PROGRAM BUTTON
C
Using the Remote Control Transmitter
Temperature indication Display
With the remote control transmitter in the “OFF” position, press the thermostat
and mode keys at the same time. Look at the LCD screen on the remote control
transmitter to verify that a C or F is visible to the right of the room temperature
display (Figure 7 & Figure 8)
Turn on the Fireplace
With the fi replace OFF, press the ON/OFF key on the remote control transmitter.
The remote control transmitter display will show the active icons on the screen.
At the same time the wall switch will activate the fi replace via the IFC module. A
single “beep” from the IFC module will confi rm reception of the command.
Turn off the Fireplace
With the fi replace ON, press the ON/OFF key on the remote control transmit-
ter. The remote control transmitter LCD display will only show the room tem-
perature (Figure 7 & Figure 8) . At the same time the IFC module will turn off
the fi replace. A single “beep” from the IFC module confi rms reception of the
command.
Figure 3: Wall switch
interface side.
Figure 4: Wall switch
battery side.
Figure 5: Town and Country
wall switch.
Figure 6: Profl ame 2 remote
battery compartment.
Figure 7: Profl ame 2
Fahrenheit screen.
Figure 8: Profl ame 2
Celsius screen.
Manual Bypass of the Remote Fireplace
If the batteries of the remote control transmitter are low or depleted, the fi replace
can be turned off manually using ON/OFF switch located on the Town & Country
wall switch (Figure 5). This will bypass the remote control transmitter.
8
TCWS38D.ver2_150817-16
5056.42524D2
