Figure 17: Town and Country
wall switch.
PROGRAM BUTTON
Linking Remote Handset and apple
®
Device to Fireplace
Town & Country Fireplaces can be operated remotely by using the remote handset that came with the fire-
place, and by using an BlueTooth
®
enabled apple mobile device and the “TC Fire” app which can be down-
loaded free from the Apple
®
app store.
Regardless of which method is used, the first two procedures are to be performed in order to establish a link
between the fireplace and the wall switch, followed by a procedure to establish a link between the remote
handset and the wall switch.
Step 1: Procedure for linking / pairing wall switch to fireplace
1. Set the wall switch selector to the “Remote” setting.
2. Press and hold
Program
button (Figure 17) on the wall switch for up to 10 seconds. Use a straight-
ened paper clip to access the button.
3. The wall switch will beep 5 times. Release the button following the beeps.
4. The fireplace will beep 3 times repeated by another 3 beeps.
5. The fireplace and wall switch are now linked/paired.
If there is cross communication with another nearby fireplace causing the other
fireplace to activate instead of the intended fireplace, repeat above procedure to
automatically switch to another one of three available channels.
Figure 14: IPI - CPI control.
11
5056.42524D2
TCWS38D.ver2_150815-16
