ORIFICE MANIFOLD
ORIFICES
Figure 20: Orifices location.
TCWS.54NGST03D_210417-24
5056.425181D
WARNING
This conversion kit shall be installed by a qualified service agency in accordance with the manufac-
turer's instructions and all applicable codes and requirements of the authority having jurisdiction.
If the information in these instructions is not followed exactly, a fire, explosion or production of carbon
monoxide may result causing property damage, personal injury or loss of life.
The qualified service agency is responsible for the proper installation of this kit.
The installation is not proper and complete until the operation of the converted appliance is checked
as specified in the manufacturer's instructions supplied with the kit.
If this unit is to be used on propane convert as follows using the components supplied with the propane gas
conversion kit. Propane conversion kit part number is TCWS.54DSTLPKIT.
Note: Factory supplied components must be used to ensure correct input. After conversion confirm proper
manifold pressure.
CAUTION
The gas supply and electrical power shall be shut off before proceeding with the conversion.
Propane Conversion
1. If installed, remove the glass
media from the burner tray and
remove the edge panels.
2. If installed, remove the burner
tray by removing the screws
attaching the tray to the burn-
ers and side panels (Figure 16
on page 11) as well as the
two screws on each end of the
tray which are screwed into the
side panels.
3. Remove burners from the ori-
fices. Remove pilot assembly if
necessary.
Conversion procedure
13
