Town & Country Fireplaces TCWS.54NG03C2, Инструкция по эксплуатации

Страница: 7 / 12

Fig #21
Date: ______________________
By / Par: ___________________
LP GAS/
DU GAZ LP
12.5 in/wc /12.5 po/c.e.
(3.11 kPa)
13.9 in/wc / 13.9 po/c.e.
(3.45 kPa)
11.0 in/wc / 11.0 po/c.e.
(2.74 kPa)
1.65 mm
Max.: 54,900 (16.1)
Min.: 46,200 (13.5)
010610 6-WS54 5052.52088
Kit # TCWS.54LPC03/ESB/ESC for use with
model: Pour utilise avec du modèle:
TCWS.54CE2
This appliance was
converted to PROPANE GAS
with this kit on this date
by the organization which
accepts the responsibility
that this conversion has
been properly made. / Cet
appariel etair converter au
gaz LP par l’emploi de la
trousse de conversion par
une organization qui accepte
la responsibilité pour une
installation en bon état.
MUST INTERLOCK
ADD NAME
ADD DATE
Fig #18
TCWS.54NG03C2 230911-12
11. Remove the aluminum cap from the top
of the pressure regulator.
(Fig. #17)
12. Press down on the center post and rotate
90°. The center post should stay down.
(Fig. #19). Replace the aluminum cap.
13. Fill in the date and the name of the
person who performed the conversion in
the white area on the conversion label.
(Fig #18). Peel off the protective backing
and apply the conversion label directly
over the gas specifi cations on the rating
label.
14. Re-locate the control box shield and
re-attach the access panel to the side
of the fi rebox with the screws
previously removed. (Fig. #20 & 21)
15. If the burner was removed in previous
steps replace in reverse order or return
to installation process on Pg. 3.
WARNING: Both the
control box shield and
the access panel must
be reinstalled after
conversion/ installation
or servicing has been
completed. Failure to do
so will cause overheat
ing and premature failure
of the control system.
CONTROL SHIELD SHOWN IN
PROPER CLOSED POSITION
Fig #17
Fig #19
Fig #20
NG
LP
7