Fig #24
ADD DATE
ADD NAME
13. Re-attach the access panel to the side of the firebox with the screws previously removed.
(Fig. #23)
14. If the burner was removed in previous steps replace in reverse order or return to instal-
lation process on Pg. 2
TCWS.38NG03.C 080709-12
9. Pull off the rubber cap from the top of
the pressure regulator.
(Fig. #21)
10. Press down on the center post and rotate
90°. The center post should stay down.
(Fig. #22). Replace the rubber cap.
11. Check all connections for leaks.
.
WARNING: The access
panel including gasket
must be reinstalled after
conversion/ installation
or servicing has been
completed. Failure to do
so will cause overheating
and premature failure of
the control system.
12. Fill in the date and the name of the person
who performed the conversion in the white
area on the conversion label. Peel off the
protective backing and apply the conversion
label directly over the gas specifications on
the rating label.
Fig #21
Fig #22
NG
LP
Fig #23
Fig #22a
8
