HOLE
11
TC30.NG04C 180411-20
Fig. #20b shows LP position
Re-attach the pilot assembly.
7.
Remove the access panel, 10 screws,
and set aside. (Fig. #25)
8.
Remove the minimum rate screw
located in the valve. (Fig. #21)
The minimum rate screw is sealed with
an o-ring. Use a thin bladed
screwdriver to back the screw out past
the limit of the threading. At this point
a groove on the screw body will be
visible just above the valve body. Insert
a thin tool (knife blade or fi ne
screwdriver
blade) into the groove and
gently pry the screw up.
Fig #20b
Minimum
rate screw
Fig #21
Содержание TC30.NG04C
Страница 17: ...17 TC30 NG04C 180411 20 ...
Страница 18: ...18 TC30 NG04C 180411 20 ...
Страница 19: ...19 TC30 NG04C 180411 20 LP ...