4
T120.RHKIT 120913-28
WALL OR CEILING INSTALLATION
The Optional Remote Heat Kit allows heat to
be transferred to other parts of the home. One
to four Remote Heat Kits may be used.
1) Remove the knockout panel from the top of
the unit for each Remote Heat Kit you are
installing.
REMOVE THESE KNOCKOUT
PANELS AS NEEDED
2) Remove the insulation directly below the
opening down to the heat shield.
4) Attach the Duct Adapter Plate to top of unit
using 4 screws.
3) Install the Flapper Box to the top of the unit.
Ensure that the fl ap in the assembly is free to
move. (Flap should be in the normally closed
position with the blower off)
INSULATION
(REMOVED)
Fig. #2
Fig. #4
Fig. #1
Fig. #3
FLAPPER BOX
INSTALLED
