Town & Country Fireplaces 22150036, Руководство по установке

Страница: 9 / 16

9
TC42_NG06D_050919-16
100000385
Propane Conversion
If the unit is to be used with propane gas, convert the fireplace from natural gas as follows using the
components supplied with this burner kit.
Note: Factory supplied components must be used to ensure correct input. After conversion confirm proper
manifold pressure.
CAUTION
The gas supply and electrical power must be shut off before proceeding with the conversion.
WARNING
This conversion kit shall be installed by a qualified service agency in accordance with the
manufacturer's instructions and all applicable codes and requirements of the authority having
jurisdiction.
If the information in these instructions is not followed exactly, a fire, explosion or production of
carbon monoxide may result causing property damage, personal injury or loss of life.
The qualified service agency is responsible for the proper installation of this kit.
The installation is not proper and complete until the operation of the converted appliance is
checked as specified in the manufacturer's instructions supplied with the kit.
1. Ensure the burner, pilot and gas supply are turned off, and the appliance has cooled.
2. Remove the two screws securing the manifold assembly to the burner (Figure 17).
3. Remove the manifold assembly from the burner (Figure 18).
Figure 17: Unscrewing manifold from the burner.
Figure 18: Orifice exposed.
Note: The propane conversion kit is not included with the burner kit. The
conversion kit is an option which must be ordered separately