economy temperature to the minimum available: 7
0
C. To set temperature levels follow
the sequence below:
1. Press the
set temperature
button ( )
2. The current programmed temperature will be shown the sun symbol indicates
comfort temperature, the moon symbol indicates economy temperature.
3. If required, adjust the currently displayed temperature to your new chosen value,
by pressing the up or down arrow buttons.
4. Press the
Comfort / Economy
button ( / ) to ‘toggle’ to the other temperature
setting. Adjust this up or down with the arrow buttons.
5. Press the
set temperature
button
6. You have now adjusted the pre-set comfort and economy temperature levels.
Select a factory pre-set time programme
1. Press the
set programme
button (marked
P
)
2. The current day number will flash. Using the up arrow button scroll to your day
group selection, or the individual day for which you wish to set a programme.
Day choices are: Mon – Su / Mon – Fri / Sa –Sun / All individual days.
3. Press the
set programme
button
4. P1 (comfort temperature 24 hours) is displayed. Using the up arrow button scroll
to the pre-set programme you require (choice of P1 – P6). The bar chart visible
at the bottom of the lcd shows the programme graphic. Black blocks indicate
comfort temperature periods, no blocks indicate economy temperature periods.
5. Press the
set programme
button. The pre-set programme is now set for the day
or day group chosen at step 2. above.
Set your own time programme
1.
Follow steps 1 to 4 above. At step 4. scroll with the up arrow button to P7, P8, or
P9.
(These are three programme entries which are user-adjustable. You can
apply one or all user-adjustable programmes to any day or day group of your
choice)
.
2. Press the set programme button. Above the ‘P’ number, there now appears a 0,
indicating the start of the 24 hours for which you are about to set economy and
comfort temperature periods. Scroll forward using the / button. The hour
number at the top of the display changes, and you will see the hour blocks being
deleted one at a time at the bottom of the display.
3. At the time when you require comfort temperature, start scrolling forward using
the up arrow button – this will continue to increase the hour number, and move
through the graphic display leaving comfort temperature ‘blocks’ in place.
4. Continue scrolling through the 24 hour period, using either the / button or
the up arrow. If you wish to go backwards you can do so with the down arrow
button. The / button can be used to change any one hour period from
comfort to economy temperature, or vice-versa – this button ‘toggles’ the
temperature setting for the hour indicated at the top of the display.
5. Press the
set programme
button. Your individual programme is now complete.
6. Whilst programming, if no button is pressed for 10 seconds, the TX will revert to
automatic mode and programming must be begun again.
