Tower Hobbies T24017, Инструкция по безопасности и эксплуатации

Страница: 18 / 22

18
The microwave should be cleaned regularly and any food deposits removed.
Remove the power cord from the wall outlet before cleaning. Don’t immerse the
appliance in water or other fluids when cleaning.
Failure to maintain the microwave in a clean condition could lead to deterioration
of the surface. This could adversely affect the life of the appliance and possibly
result in a hazardous situation.
Never use hard detergent, gasoline, abrasive powder or metal brush to clean any
part of the appliance.
Do not remove the waveguide cover.
After lengthy use, it is possible for odours to emit from the Microwave.
The following 2 points are some methods to remove odours or unpleasant smells:
Place several lemon slices in a cup, then heat with high Micro Power for 2-3 min.
Put some orange peel into the Microwave, and then heat them with high Micro
Power for 1 minute.
NEVER IMMERSE THE MICROWAVE, CORD, OR PLUG IN WATER OR ANY OTHER
LIQUID.
Tips for cleaning
If the seal of the microwave is dirty, it may stop the door from closing properly. Keep
the seal clean.
Spicy sauces such as ketchup and mustard, or salty dishes such as salted meat contain
ingredients that can erode the surface. After use, you should always clean the oven
interior.
Residue of food from spillovers or splatters will attract microwave energy causing it to
burn on. This could reduce the efficiency of the microwave and may cause bad odours.
Details for cleaning door seals, cavity and adjacent parts:
• Exterior: Wipe the enclosure with a damp soft cloth
• Door: Using a damp soft cloth, wipe clean the door and window. Wipe the door
seals and adjacent parts to remove any spills. Wipe the control panel with a
slightly dampened soft cloth.
• Interior walls: Wipe clean the interior with a damp soft cloth. Wipe clean the
waveguide cover to remove any food remnants.
• Glass turntable / Rotation ring / Rotation axis: Wash with mild soap water. Rinse
with clean water and allow drying thoroughly.
NOTE!
Do not remove the Waveguide cover during cleaning.
Make sure the Waveguide cover is installed correctly and has not been damaged
during cooking.
9 - Cleaning & Care