![Tower Hobbies T17065 Скачать руководство пользователя страница 7](http://html1.mh-extra.com/html/tower-hobbies/t17065/t17065_safety-and-instruction-manual_1140768007.webp)
7
Using Your Appliance.
Notes:
Select the appropriate accessories.
Use oven gloves to take out the accessories, containers etc. once cooking has finished.
Always put the oil drip tray in the lowest position for gathering oil from fried food.
DO NOT let food exceed the highest position. Bear in mind that the ingredients may
expand during heating.
Using the Accessories:
Oil Drip Tray
Slide the oil drip tray into the bottom of the oven, along the grooves on either side of the
oven walls so that any dripping fat, crumbs or other food residues can be collected in it.
Air Flow Rack
The racks are intended for drying. However, they can also be used for crisping, warming up
etc.
Slide the air flow racks into the oven cavity along the guides on either side of the oven
walls. The heating element is located at the top of the cooking space. Therefore the higher
up a baking rack is placed, the more intense the heat is from above.
In the top section, the food is cooked faster and crispier. The middle position should be
chosen to achieve even heating from all sides. The bottom rails are suitable for gentle
cooking.
Skewer Rack
Assemble the skewer rack.
1.
Place the skewer rack discs onto the shaft, ensuring the flat faces of the discs face
inwards.
2.
Thread food onto the separate skewers and place onto the skewer rack by slotting the
sharp end of the skewer into the narrow slot and the hooked end of the skewer into
the shaped slots. Squeeze and tilt the hook downwards to lock into place.
3.
Place the rack into the oven. Insert the shaft end with just one notch into the holder
on the right side of the oven walls. Push into the holder as far as it will go.
4. Hang the other end of the shaft (with two notches) into the support on the left-hand
side of the oven.
5.
Check that the rack fits securely. It must not be able to rotate about its own axis
when the device is switched off. If this is not the case, plug the right-hand end of the
shaft deeper into the holder.
6.
After use, remove the rack using the removal tool (see the ‘Removal Tool’ section).
Always use oven gloves to remove the rack and the grilled items. Squeeze and tilt the
hook upwards to remove the skewers from the rack.