7
•
Fasten the shift and brake cables with the
included cable ties.
•
Install the seat post with grease or assembly
paste. Tighten the seat post clamp to 9 Nm
and make sure components are secure.
•
When mounting the pedals, pay attention to
the respective mounting side and markings.
Apply grease to the pedal axle threads and
mount the pedals with a maximum torque
of 25 Nm.
STARTUP
Important:
Never ride without having
checked points 1 – 2 below.
1.
Ensure that the quick release fastener at the
rear wheel is closed.
2.
Insert the safety pin through the frame AND
drawbar.
BEFORE STARTUP
Important:
The Streamliner is is designed for
cycling and rough terrain. Using it requires
a certain degree of experience and confidence
cycling in these conditions.
You should take the following points into
consideration before using the Streamliner
with a child:
•
Test some routes with the Streamliner be-
fore using them with a child for the first time.
•
Beginners should avoid using the Streamlin-
er off-road.
•
Riding with a trailer alters the handling of
the bicycle, and the braking effectiveness is
reduced considerably compared to riding
without a trailer. Braking distance is also
increased compared to riding without a
trailer attached.
•
Your bike should be in good working order,
especially the brakes. This will help to ensure
your safety.
ASSEMBLY
•
Insert the draw-bar into the frame, then
insert the cotter pin (see picture in
Startup/2.). Align the frame and draw bar,
then tighten both frame bolts to 9 Nm.
•
Attach the handlebar to the stem and tighten
bolts to 5 Nm. Pay attention to ensure
correct brake and shift cable routing.
Check the handlebars for torsional stability.
