- 34 -
tousek
/ EN_GTZ-Digital_07 / 10. 10. 2019
Flashlight module
• The flashlight module enables the connection
of a flashlight
(clamps H1, 92),
which will be
triggered with a relay (contact load max. 230V,
60W)
• In addition a button or switch can be connected
to the module
(clamps 1/2),
its function is
identical to the radio receiver.
• The flashlight function can be adjusted in
the menu
5.6.3./3. Level / Menu 7, „signal
lamp“.
13. Flashlight module
(optional accessory)
GTZ 55, 110 Digital
technical data
flashlight module for GTZ digital
relay contact load
max. 230V, 60W
application
indoor
article no.
12111950
flashlight module connection
Mortal danger due to electric shock!
• Before cabling works will be carried out, the operator system must be necessarily disconnected
from the power supply.
• Make sure that the power supply remains disconnected while cabling works are carried out.
• Remove the backside cover (
A)
, disconnect the plug
(S)
and pull out the radio receiver
(F).
• Open the enclosure of the flashlight module
(B)
, lead the power supply cable of the flashlight through the rubber grommet
(T)
of the module and connect it to the removable
clamps H1/92.
• Carry out the connection of the flashlight as shown below.
• If a switch or button will be connected (with identical function as the
radio receiver) so its connection cable must be led through the rubber
grommer
(T)
as well and connected to the clamps 1/2.
MS1
MS2
N
L
module
control unit
GTZ Digital
radio receiver
button
MS1
MS2
92
H1
2
1
N
L
button
max. 230V, 60W
flashlight
T
B
FE
A
F
S
