Page
6
of
8
How to add ACWand units to Wanderfull controller
The ACWand uses Wi-Fi connection to connect and pair with the Wanderfull controller. To
pair the unit with the system, follow these steps:
1.
When logged in with a TECH user to the TouchWand app, go to
Settings → ACWand
.
2.
Check 'Enable connection'.
3.
Fill the following details:
o
Listen on IP: 0.0.0.0
o
Port: 7433
o
Max connections should be the number of units to be installed.
4.
Press 'Save' button.
5.
Go to
Units
page
→
press
Add Unit
.
6.
Select 'ACWAND'.
7.
Enter MAC address (run IP scanning tool in your computer).
8.
Select Temperature sensor.
9.
Select AC type.
10.
Enter AC name.
11.
Press 'Pair' button and 'Done'.
