![TouchWand ACWand Скачать руководство пользователя страница 4](http://html1.mh-extra.com/html/touchwand/acwand/acwand_installation-manual_1140389004.webp)
Page
4
of
8
ACWand Installation
1.
Press and hold SW1, then connect the power adaptor to the device (while pressing).
2.
Hold SW1 until a green LED turns on. It will enter Access Point mode. The Access Point
setting are:
a.
SSID: "RolbitSetAP"
b.
Password: "rolbit1234"
3.
After the connection to AP has been made, open web browser and go to IP: 192.168.4.1
4.
Press and hold SW1 and refresh the page at the same time. You will be redirected to the
following setup page: