8 of 14
Note:
The DA950-U amplifier provides RJ45 input and output connectors to enable daisy-chaining of components.
R L R L
+ - + -
+ - + -
+ - + -
R L
1
3
8
7
5
4
10
9
2
6
DA950-U Amplifier
1.
Power connector:
Connect the supplied power cord here. The DA950-U will automatically turn on when the power
cord is plugged into a wall outlet (AC 120V /60Hz MAX 1000W). There is no power switch.
2.
Power / Settings Lights:
•
Bass Boost: Lights up when bass boost is on.
Should always be on while this amplifier is in use inside the
PowerPack 725.
•
3-CH Mode: Lights up when 3-channel mode is on.
Should always be on while this amplifier is in use inside the
PowerPack 725.
•
Power Amp #1: Lights up when power amp #1 is on
•
Power Amp #2: Lights up when power amp #2 is on
3.
Protection mode indicators, channels #1 and #2:
lights up when a channel has gone into over-current protection
mode or thermal protection mode.
4.
Balanced audio input/output connectors
(unused in this configuration)
5.
Balanced audio input/output connectors:
Two RJ45 connectors are provided to connect the DA950-U to a jukebox
and/or other audio equipment via standard category 5 cable. Wired in parallel. One should be used as input, and the
other can then be used as a "thru" connection.
You can purchase pre-wired cable, or you can wire your own cable as follows:
RJ45 Cable Wiring
6.
Satellite speaker outputs:
The two connectors, wired in parallel. Provides two channels (stereo) of output, making it
easy to wire up to two speakers per channel for a total of four speakers. 125W / 4 ohms per channel.
CAUTION:
Do not connect the AC power cord to a wall outlet until all audio
connections have been completed.
1
2
3
4
5
6
7
8
white + orange
orange
white + green
blue
white + blue
green
white + brown
brown
white + orange
orange
white + green
blue
white + blue
green
white + brown
brown
1
2
3
4
5
6
7
8
Near
End
Color
Color
Far
End
Straight-through category 5 cable wiring
RJ45 connector
Содержание PowerPack 725
Страница 14: ...14 of 14...
