Three-channel Amplifier
13
Three-channel Amplifier
The DA415 3-channel amplifier is shown in the figure below.
Note:
The 3-channel amplifier provides RJ45 input and output connectors to enable daisy-
chaining of components.
DA415 Three-channel Amplifier
1. Power connector
Connect the supplied power cord here. The DA415 will automatically start when the power
cord is plugged into a wall outlet (AC 120V /60Hz MAX 1000W). There is no power switch.
CAUTION:
Do not connect the AC power cord to a wall outlet until all audio
connections have been completed.
2. Power/Standby light
• Green: Indicates that the DA415 is operating normally.
• Red: Indicates that the amp is in standby or that an abnormal condition has been encountered,
and that protection mode has been activated.
3. Balanced audio input/output connectors
Two RJ45 connectors are provided to connect the DA415 to other audio equipment via
standard category 5 cable.
Содержание DA415
Страница 1: ......
Страница 4: ...iv ...
Страница 18: ...18 Hardware Overview and Installation ...
Страница 20: ......