Touchstone 80024, Руководство пользователя

Страница: 3 / 15

3
WARNING

For residential use only! NOT for commercial use! Any commercial or public use of this
heater
voids all warranties
, and could cause
injury
.

This product is not intended to be a primary heat source. It is for supplemental heat only.

INDOOR use only! NEVER use this heater outdoors! Doing so may result in electric shock!

Risk of electric shock
!
DO NOT OPEN!
No user-serviceable parts inside!

NEVER modify this heater . Doing so could result in personal injury or property damage.
Modification of this fireplace completely voids all warranties .

ALWAYS
turn this heater off before unplugging it from the outlet.

ALWAYS disconnect this unit from the power supply before performing any assembly or
cleaning, or before relocating the electric fireplace.

NEVER leave this heater unattended. ALWAYS unplug this heater when not in use.

ALWAYS
store this heater in a dry location.
NEVER
use the fireplace if it has become wet.

ONLY use this heater on a 110-120V AC 15-Amp grounded circuit . NEVER overload the
circuit. If this heater trips the circuit breaker, unplug all other appliances on the same circuit
before the next use. Avoid plugging other appliances into the same circuit as this heater.

NEVER plug this heater into an outlet that is old , cracked , or has any loose wires or
connections . Plugging this heater into a faulty outlet could result in electric arcing within the
outlet that could cause the
outlet
to
overheat or catch fire
.

ALWAYS check your heater cord and plug connections with each use !
i) MAKE SURE the plug fits tight in the outlet! Faulty wall outlet connections or loose plugs
can cause the outlet to overheat.
ii)
Heaters draw more current
than small appliances.
Overheating
may occur even if it has
not occurred with the use of other appliances.
iii) During use check frequently to see if the plug outlet or faceplate is HOT !
iv) If the outlet or faceplate is HOT , discontinue use immediately and have a qualified
electrician inspect and/or replace the faulty outlets.
Preparation
This product includes a GLASS panel! Always use extreme caution when handling
glass. Failure to do so could result in personal injury or property damage .
Remove all parts and hardware from the carton and place them on a clean, soft, dry surface. Parts
and assembly steps are grouped for free-standing or wall-hanging use. Check the parts list to make
sure nothing is missing. Dispose of packaging materials properly. Please recycle whenever possible.
You will need the following tools (not included):
Phillips screwdriver; stud finder; level; tape
measure; electric drill; 1/4” wood drill bit, hammer.