Touchstone 80024, Руководство пользователя

Страница: 14 / 15

14
4. Bluetooth playback
Long press the button to boot - the default Bluetooth mode (voice prompts to wait for connection)
Phone Bluetooth On - Automatically searches for Bluetooth devices
Locate the name "MX-LY" Bluetooth device - Select Connect
Bluetooth audio voice prompt "Connection successful"
Note: Bluetooth connection default without password, if prompted for a password, enter 0000 to
connect
The phone can be operated to play music
5. LED lights prompt
(Bluetooth on) red and blue light flashing alternately, waiting for connection; blue light, the
connection is successful
(Audio charging) a long red light, charging in progress
NOTE:Please store the product under normal temperature. Do not cover it
Remote Control Battery Information
 This remote control uses TWO AAA batteries (Not included ).
 Instructions for battery installation are on the Remote Control battery compartment.
NEVER
dispose of batteries in
fire.
Failure to observe this precaution
may result in an
explosion . Dispose of batteries at your local hazardous material processing center.
Temperature Limiting Control
This heater is equipped with a Temperature Limiting Control. Should the heater reach an unsafe
temperature, the heater will automatically turn OFF. To reset:
1. Unplug the power cord from the outlet.
2. Turn the power switch on the touch display PANEL to off, Wait 5 minutes.
3. Inspect the fireplace to make sure no vents are blocked, or clogged with dust or lint. If they are,
use a vacuum to clean the vent areas.
4. With the POWER switch in the OFF position, plug the power cord back into the outlet.
5. If the problem continues, have your outlet and wiring inspected by a professional.
Care and Maintenance
Cleaning
ALWAYS turn the heater OFF and unplug the power cord from the outlet before
cleaning, performing maintenance, or moving this fireplace. Failure to do so could result in
electric shock, fire, or personal injury
.
NEVER immerse in water or spray with water. Doing so could result in electric shock,
fire, or personal injury.
Metal:
 Buff using a soft cloth, slightly dampened with a citrus oil-based product.
 DO NOT use brass polish or household cleaners as these products will damage the metal trim.
Glass:
 Use a good quality glass cleaner sprayed onto the cloth or towel. Dry thoroughly with a paper
towel or lint-free cloth.

NEVER
use abrasive cleansers, liquid sprays, or any cleaner that could scratch the surface.