6
Typical usage scenario:
(1) Use the bulit-in watch faces and the default setting.
(2) Heart rate 24h monitoring is enabled;
(3) sleep monitoring is enabled;
(4) 50 pushed messages a day;
(5) raise wrist to see watch time 100 times;
(6) test blood-oxygen 2 times per day;
(7) workout 2 times a week for 30 minutes at a time.
2.4.2. Wearing
(1) How to wear
1) Put the watch on your arm with the display facing up.
2) Thread the band through the buckle.
3) Insert the stick into the small hole of the band with a comfortable position on your wrist
and fix it.
(2) How to take off
1) Pull the band out of the buckle.
2) Pull out the stick from the small hole.
TIPS:
Please take off the watch on a desk or somewhere soft in case
of falling down or being damaged.
(3) How to exchange
1) To remove the wristbands, turn over the watch and find the quick-release lever.
2) While pressing the quick-release lever inward, gently pull the wristband away from the
watch to release it.
3) Repeat on the other side.
(4) How to assembly
1) To reattach the wristbands, slide the pin (the side opposite the quick-release lever) into
the notch on the watch. Attach the wristband with the clasp to the top of the watch.
2) While pressing the quick-release lever inward, slide the other end of the wristband into
place.
