4
2.3.2. About paring
(1) Please kindly tap "Allow", "Agree" and "Done" when login.
(2) Please kindly make sure the watch you want to be paired is not connected by another phone/device.
One watch can only be paired and bind by one phone.
(3) Please kindly make sure your phone's Bluetooth is enabled.
(4) Please DO NOT pair the watch via system's Bluetooth, it need to pair the watch via the TouchELex
APP. (If you pair the watch via the bluetooth of the system,successfully. You need to ignore this device
from the system's Bluetooth list and then pair the watch via the TouchElex APP again )
(5) Please kindly enable the “Location” on your phone’s settings.
(6)Please let the phone pair with the watch within 0.5 meters at the first time.
(7) The data on your watch will be cleared when operating unbind with the watch.
2.3.3. Unbind device
l Please unbind the watch if you would like to use another phone to pair with the watch.
Here is the steps:
(1) TouchElex app
➞
Device
➞
More device settings
➞
Unbind
(2) Bluetooth on the system
➞
Encke
➞
tap Setting icon
➞
“Unpair” this device/ ignore this device
