4 of 4
ISSUED: 10-18-06 SHEET #: 202-9172-4 08-14-14
This item was manufactured for Panasonic by Peerless Industries.
Slide keyhole slots of tilt plates (
B
) onto spacers provided with screen. Secure tilt plates (
B
) to screen by using
eight M5 x 6 mm screws (
G
) to attach four locking tabs (
C
) to keyhole slots as shown in Detail 1.
Attach clevis pin to wall plates (
A
) using two
washers (
D
). Secure clevis pin (
E
) with cotter pin (
F
)
as show below. Attach tilt plates (
B
) to wall plates
(
A
) by sliding tilt plate (
B
) onto clevis pin (
E
) per set
of brackets.
Note
: Screen not shown for clarity.
Set tilt plate (
B
) to desired tilt shown in detail 2.
Secure with one clevis pin (
E
), two washers (
D
), and
one cotter pin (
F
) per set of brackets.
DETAIL 1
DETAIL 2
2
3
4
B
C
G
A
B
D
F
E
A
B
4 °
2 °
0 °
© 2011 Peerless Industries, Inc. All rights reserved.
Peerless is a registered trademark of Peerless Industries, Inc.
All other brand and product names are trademarks or registered trademarks of their respective owners.
D
D
F
Note:
Side clearance is
needed to install pin
E
