3 of 4
ISSUED: 10-18-06 SHEET #: 202-9172-4 08-14-14
This item was manufactured for Panasonic by Peerless Industries.
• Installer must verify that the supporting surface will safely support four times the combined weight of all attached
equipment and hardware.
• Only meant for surface mounting to the desired wall, recessed mounting or any other application please contact
customer care.
Installation to Wall
Attach wall plates (
A
) to supporting surface. Distance between centers of wall plates (
A
) must be 59.5" (1511mm)
and wall plates (
A
) must be level with one another.
M10 x 20 mm socket screws (
J
), nylock nuts (
H
), and SAE wahers (
I
) may be used to attach wall plates to wall.
Note
: If using custom fasteners to attach wall plates to wall be sure that fasteners can support the combined weight
of all attached equipment and hardware.
1
WARNING
• If wall mounts are not level and square, mount will not function properly.
• If using custom fasteners to attach wall plates to wall be sure that fasteners can support the combined weight of all
attached equipment and hardware.
CAUTION
59.5"
(151
1 mm)
A
A
I
J
H