Touch T714C, Руководство пользователя

Страница: 7 / 20

7
PART 2. BREWING A CUP
Setting Up Your Brewer
IMPORTANT: DO NOT use the brewer until it has been set-up for its first use.
NOTE: If the brewer has been exposed to temperatures below freezing, allow the brewer at least two hours to reach room temperature before using it. A frozen
or extremely cold brewer may not operate properly.
1. Unwrap the electrical cord and remove all pieces of adhesive tapes. Then view the rear of the product.(Fig. 1)
2. Insert a 1/4" diameter water supply line into the Water Inlet Adaptor on the rear of the water tank. (Fig. 2)
NOTE: If the water supply line is not 1/4" diameter, an adapter may be needed. Please consult a professional plumber if necessary.
3. Place a large mug or cup (12 oz minimum) on the Drip Tray. Plug the brewer into a 3 prong-grounded outlet. (Fig. 3)
4. Press the Power Button on top of the brewer. The blue Power Light will illuminate. (Fig. 3)
5. About half of the water tank will fill automatically.
NOTE: DO NOT insert a Pod into the Red Cup Holder at this time.
Fig. 1 Fig. 2 Fig. 3