Touch T214B, Руководство пользователя

Страница: 12 / 24

12
PART 2. BREWING A CUP
Adding Water
The upper left blue Low Water Light will blink when the water level in the Water Tank is low or if the Water Tank has been removed. (Fig. 13) The brewer will
not allow you to brew while the blue Low Water light is blinking. The brewer will shut off automatically if the Water Tank is not refilled within about 2 minutes.
The Water Tank can be filled in two ways.
1. Open the Water Tank Lid and pour water directly into the Water Tank up to the MAX Fill Line while the Water Tank is still attached to the brewer. (Fig. 14)
After the Water Tank is filled with water, close the Lid.
2. Remove the Water Tank from brewer by tilting and lifting away from the Water Tank away from the brewer. Open the Lid, and fill the Water Tank with
water but not more than the MAX Fill Line. Place the Water Tank back on to the rear base of the brewer and close the Lid. (Fig. 15)
IMPORTANT: DO NOT remove the Water Tank during the brewing process.
Fig. 13 Fig. 14 Fig. 15