Touch Dynamic Pulse Ultra Touch Monitor 17, Руководство пользователя

Страница: 18 / 22

10
4-4.
Install the LCM Module
1. Follow the steps in Chapter 3-1 to diassemble the stand from the LCD panel.
2. Remove the thumb screw (x1) from the VESA top cover and then pull the cover
up.
3. Attach the VFD module to system by fastening the thumb screw (x1).
4. Route the RJ-45 cable through the hole of the stand as picture shown.
5. Attach the stand to the LCD panel
and fasten the thumb screw (x1).
6. Connect the RJ-45 cable to COM
port on the systems IO panel.
Make sure the system is powered
off.
* Please note the cable cover (refer
to Chapter 2-2) have to be removed
before routing the cable.