Totoku LV32P5-M, Руководство пользователя

Страница: 12 / 48

- 10 -
ENGLISH
1. Select a multi-display setup in the Multi-display setup section.
Multi-display mode Display configuration
Single mode:
Single-display setup
1
Clone mode:
Two displays on the same card display
the same image respectively.
1 1
Stretched mode:
Two displays on the same card are
combined into one desktop.
1
2 x 1
1
1 x 2
*Supported by
ME213L only.
Independent mode:
Two displays on the same card are
working independently and separately
2
1
1 2
2 displays
2. Set the display rotation, resolution, and color palette for the selected Multi-display
setup (
①
) in the
Displays Settings
section (
②
).
Setting item Explanation
Display rotation
Rotation angle in a counterclockwise direction. Selectable
from 0 degrees, 90 degrees, 180 degrees, 270 degrees
Mode source
Primary and secondary of connected displays.
Display 1 = Primary, Display 2 = Secondary
Color mode Display resolution
Color palette Number of colors on the screen
Reduce tearing Reduction of residual image caused by tearing
Note: The two high-resolution displays cannot have different settings, regardless
of their display modes in stretched mode. Set the same resolution for both displays
in stretched mode.
3. Click "Apply" for the settings to take effect. If all three displays are properly set,
click "OK " to the confirmation message.
Note: If any of the screens go blank for a several seconds and come back on with
the original resolution settings, check if the resolutions are proper for the display by
referring to their specifications.
4. Click "OK" and close the PowerDesk-SE dialog box.
4
Display settings are configured. Remove the driver CD from the CD-ROM drive.