6
ENGLISH
INSTALLATION PROCEDURE
YP990 Paper Holder
1. Hold the body against the wall and
mark drill points. Open 1/4" (6mm) in
diameter, over 1-1/2" (40mm) deep
holes for the wall anchor.
2. Drill the wall holes for the provided
wall anchors. Hold the front long
driver to mount the body on the wall
with flat head wall screws to fix the
body. Avoid scarring the body with
the tools.
3. Install the cover from below the body.
Secure the cover with the provided
hex wrench and cover screws.
Wall Screw Position
4
″
(100mm)
2
″
(50mm)
2
″
(50mm)
Flat Head
Wall Screws
Wall Hole
Wall
Anchor
Body
Cover Screw
Cover
Front
