Toto Washlet SW3004, Инструкция по эксплуатации

Страница: 16 / 22

Gap between the Main Unit and Bowl Unit
(Approximately once a month)
Maintenance
Gap between the Main Unit and Bowl Unit Gap between the Main Unit and the Toilet Lid
Toilet paper, etc.
(May cause damage.)
Soft cloth soaked
in water
1
3
Clean the top of the bowl unit and the bottom of the main unit.
• Wipe with a soft cloth soaked in a diluted, pH neutral kitchen detergent. Then, dry the surface it
with a soft cloth soaked in water so that no detergent remains.
If the power is not unplugged,
the product may malfunction or
cause a failure or electric shock.
You can remove the main unit to clean the top
of the bowl unit and the bottom of the main unit.
2
Remove the main unit.
• Do not pull the unit with undue force.
(because the water supply hose and
power cord are attached.)
5
Insert the power plug.
• The "Power" LED illuminates.
4
Align the main unit with the center of the
base plate and press it
fi rmly onto the base
plate until a click sound is heard.
Click
Push the main unit fi rmly on to the
base plate until a click sound is heard.
(Doing so may cause the main unit to come
loose and fall, resulting in injury.)
After mounting, check that the main
unit does not detach even when pulled.
Mount the main unit.
Unplug the power plug.
Water supply hose
Power cord
Pull the main unit toward you while
pressing the "Main unit removal button".
Main unit
removal button
Base plate
Bolt
Top of the bowl unit
CAUTION
Gap between the Main Unit and the Toilet Lid
(Approximately once a month)
Soft cloth soaked
in water
Toilet paper, etc.
(May cause damage.)
6
Open and close the toilet lid
to check the reinstallation.
3
Wipe with a soft cloth that
has been soaked in water
and wrung out thoroughly.
1
Unplug the power plug.
The toilet lid can be removed for
thorough cleaning.
4
Reinstall the toilet lid.
: Join the pin and the hinge on the
right side.
↓
Slightly tilt the toilet lid to the front.
↓
: While pulling out the left side,
↓
: Mount by joining the hinge with the
recess.
* Be careful not to pinch your fi ngers.
5
Insert the power plug.
• The "Power" LED illuminates.
2
Remove the toilet lid.
Slightly tilt the toilet lid to the front.
↓
: Pull the left side outward.
↓
: Disconnect the hinge from the recess
and pull up.
↓
: Disconnect the right side.
Hold with
both hands
Removing and Reinstalling
Hinge
Recess
Pin
Hinge
30 31
Maintenance