Toto WASHLET SW2024, Инструкция по эксплуатации, Страница: 14 / 24

26 27
Maintenance
WARNING
Always unplug the power plug from the
outlet before maintenance or inspection.
(Failure to do so may cause electric shock
or malfunction, resulting in a breakdown.)
*Except when using "Wand cleaning".
Do not use a dry cloth
or toilet paper on plastic
parts.
(May cause damage.)
Main unit
Power plug
*For safety, disconnect the
power plug before cleaning
or maintenance.
27
Deodorizing fi lter
(Approximately once a month)
(SW2043R only)
1
Unplug the power plug.
2
Remove the deodorizing fi lter.

Hold the knob and pull outward.

Do not pull with undue force.
(May cause damage or malfunctions)
Knob
Deodorizing fi lter
3
Clean with a tool such as a
toothbrush.

When washing with water, dry o ff all water
before mounting.
Toothbrush, etc.
4
Mount the deodorizing fi lter.

Push fi rmly until a click sound is heard.
5
Insert the power plug.

The POWER LED lights up.
Main Unit
(Approximately daily)
Soft cloth soaked in water
• Toilet paper
• Dry cloth
• Nylon scrubbing pads
(May cause damage.)
1
Unplug the power plug.
2
Wipe with a soft cloth that has
been soaked in water and
wrung-out thoroughly.
■ For heavy dirt

Wipe with a soft cloth soaked in diluted,
neutral kitchen detergent, and then wipe
with a soft cloth soaked in water.
• Neutral kitchen detergent
• Paint thinner
• Benzene
• Powdered cleanser
3
Insert the power plug.

The POWER LED lights up.
Attention!
●
The Washlet is an electric appliance.
Be careful not to let water seep inside or leave detergent
in the gap between the main unit and toilet bowl.
(May damage plastic parts or cause a malfunction.)
●
When using a toilet cleaner to clean the
toilet, wash it o
ff within 3 minutes and leave
the toilet seat and toilet lid open.
  Wipe o ff any cleaner that remains on the toilet
bowl. (If vapor from a toilet bowl cleaner enters
the main unit, it may cause a malfunction.)
● Do not push or pull the covers around the
wand with undue force.
(May cause damage or malfunction.)
●
Wipe the back surface of the toilet seat and
the toilet seat cushions with a soft cloth
tightly wrung out with water.
(Otherwise adhesion of dirt may result in discoloration.)
Power plug
(Approximately once a month)
Dry cloth Wet cloth
1
Disconnect the power plug
and wipe it with a dry cloth.
2
Insert the power plug.

The POWER LED lights up.
WARNING
● Periodically remove dust from
the blades and other parts of the
power plug.
 
Unplug the power plug and wipe it
with a dry cloth.
● Fully insert the power plug.
● When unplug the power plug, hold
the main body of the power plug.
  Pulling the power cord may damage
the power plug or power cord.
Maintenance