Toto WASHLET MS922CUMFG Скачать руководство пользователя страница 56

Страница: 56 / 60

Toilet Seat and Toilet Lid (Auto open/close)

Trouble

Please check

Ref.

Page

The toilet lid does not

open automatically

●

Is "Auto open delay" set to "30 seconds" or "90 seconds"?

●

After the power plug is inserted, the toilet lid does not open automatically for
about 10 - 60 seconds.

➞

Open and close by hand.

●

Is a toilet lid or seat cover installed?

➞

Remove any covers.

The toilet lid does not

close automatically

●

Is "Auto open/close" set to "OFF"?

➞

Set to "ON".

●

In the following cases, the toilet lid closes in about 5 minutes.

• When you did not sit on the toilet seat

• When you sat on the toilet seat for less than 6 seconds

• When you stood in front of the bowl unit for less than 6 seconds

●

If they do not close automatically even though "Auto open/close" is set to
"ON", the body sensor may be detecting incorrectly.

➞

If there is a reflective object in front, such as a mirror or glass, move the
reflective object or use a curtain or other object to block it.

The toilet lid opens

on its own

●

Is the body sensor directly exposed to sunlight?

➞

Do not directly expose the sensor to sunlight, because it may cause
incorrect detection.

●

Is there a heater within the detection range of the body sensor?

➞

Do not place within the detection range of the body sensor.

●

Is a urinal or wash basin also installed in the bathroom?

➞

The body sensor may detect someone using the urinal, causing the toilet
lid to open or close.

●

When the bathroom door is open, the sensor may detect people who pass in
front of the toilet.

The toilet lid closes

on its own

●

Is "Auto open/close" set to "ON"?

➞

You can turn it "OFF".

●

Is "Auto close delay" set to "25 seconds"?

●

The seat switch will not turn on unless you sit on the seat properly.

➞

Sit back on the toilet seat.

38
13

The toilet lid and

toilet seat open at

the same time

●

Is "Seat/lid" set to "Seat·lid" ?

Stops (or closes)

while opening

●

If the lid or seat hits an obstruction the

rst time it opens after the power plug

is inserted, it may stop (or close) partway during the next operation.

➞

Eliminate any obstructions and unplug the power plug. Insert the power
plug again after about 5 seconds. Then press

"Opening and closing

the toilet seat" button.

The open timing has

changed

●

Detection by the body sensor may be dif

cult when the room temperature

exceeds 86°F (30°C), such as in the summertime.

Cannot open or

close with the

remote control

●

If it opens automatically.

➞

Check "Is the remote control working?"

●

If automatic opening does not work either

• The toilet lid may not be mounted correctly.

→

Mount them correctly.

●

Incorrect detection may occur when operating under

uorescent lights.

Reference

Содержание WASHLET MS922CUMFG





























































Результаты поиска

Содержание WASHLET MS922CUMFG

Отзывы:

Бренды по названию

Популярные бренды

Toto WASHLET MS922CUMFG, Инструкция по эксплуатации

Результаты поиска

Содержание WASHLET MS922CUMFG

Отзывы:

Бренды по названию

Популярные бренды