Toto TLP02201, Руководство по эксплуатации

Страница: 16 / 20

15
B-1
B
Daily Care
Care for the water discharge port
1
．
Loosen and remove the countersunk small screw using a hexagonal
wrench (distance across faces: 2 mm).
3
．
Remove dirt and debris caught in the wire screen using a toothbrush, etc.
4
．
Assemble the water discharge port case on the spout and lock it in
place with the countersunk small screw.
Press the water discharge port case into the spout with a finger and
tighten the setscrew.
5
．
When mounting work is complete, check the water discharge port for
any water leaks.
If the water discharge port case is not mounted properly, re-mount it.
Turn the cold-water handle counterclockwise.
Turn the hot-water handle clockwise to adjust the flowrate and
the temperature.
A-1
How to adjust the flowrate and temperature
How to Use
A
To stop cold/hot water
Be sure to first turn the hot-water handle counterclockwise.
Turn the cold-water handle clockwise.
*If supply water pressure is high and handle operation is heavy, please
adjust the flow rate by stop valve without being too small.
(Handle operation will be lighter.)
A-2
A-3
Open and close the Pop-up waste
Pull the pulling bar.
The Pop-up waste close and water can be accumulated in a wash bowl.
If you push it, the Pop-up waste opens and water is drained.
2
．
Insert the flat-blade precision screwdriver in the notch between the
water discharge port case and the spout, and remove the water
discharge port case.
Since the O-ring of the water discharge port case is semi-transparent,
pay attention not to lose it.
EN