Toto TEA99 V100, Инструкция по эксплуатации

Страница: 12 / 14

When the cover of the flush valve is stained,
wipe it with a cloth soaked with properly
diluted neutral detergent. Then wipe the
detergent off the cover with another cloth
soaked with water after wringing it well and
finally wipe the cover with a dry cloth.
Never use cleanser, polishing powder
,
detergent that includes coarse particles, gent,
and a nylon scrub brush. They will damage the
surface of the appliance. When cleaning the
cover, be careful not to damage the surface of
the infrared sensor.
Nylon scrub brush
Cleaner
Thinner
Acid or alkaline
detergent
Rotate to open.
Valve base Constant flow
valve Valve cover
Clamping
Filter
When the water pressure is
less than 0.07MPa,the water
flushing volume becomes small.
The proposal is open the valve
cover with hex nuts tool and
remove constant flow valve and
clamp ring.
Disconnect
dirt
appropriate